Search

Filters
DD18
18 INCH LENGTH (457mm)
£12.00
DD36
36 INCH LENGTH (914mm)
£22.00
SPLINED
Has a 14mm (9/16") diameter x 36 spline machined on one end.
£24.00
SPLINED250
£23.00
PIL15
For 15mm Diameter Shaft
£17.00
PIL19
For 19mm diameter shaft
£14.50
PIL153
For 15mm Diameter Shaft SHAFT NOT INCLUDED
£19.00
PIL152
For 15mm Diameter Shaft
£19.00
SPLINED35019
350mm LONG
£37.00
SPLINED600
600mm LONG
£32.00
SPLINED400
400mm LONG
£29.00
WBOX2
Height from base to top of spindle 64mm.
£24.00
TWM105L
FOR TAPER MOUNTING WIPER ARMS MAXIMUM TORQUE 6 nm
£85.00
COLLNK
Both splines 14mm (9/16") x 36
£59.00
UJD2
Size 80mm x 38mm.
'DD' at both ends.
£28.00
QRSW3
With 67mm long splined weld-on shaft
£65.00
UJD1
Size 80mm x 38mm.
14mm (9/16") x 36 spline at one end and 'DD' at the other end.
£28.00
CVB2380
All dimensions will stretch at least 5mm.
£4.00
COLLNK2
460mm
£65.00
WBAD
Accept all our 13.5mm push-on wiper arms.
Some engineering and fabrication may be required.
Possible method of mounting on other wheel boxes.
£7.50
SWH2
Tapered hexagon shaft fitting starting at 17mm across the flats.
Two sets of 6 holes for steering wheel mounting @ 70mm PCD (Momo) and 74mm PCD (Nardi).
£43.00
QRSW
Hexagonal shaft adapter (I.D. 19mm) is welded to the top of your steering column.
£51.00
CSKCT
90° cut 12mm head diameter.
£5.00
SWH1
21mm diameter splined shaft fitting.
Two sets of 6 holes for steering wheel mounting @ 70mm PCD (Momo) and 74mm PCD (Nardi).
£38.00
BSKS

11mm diameter shaft.

£2.00
BSK

10.8mm diameter shaft.

£2.00
UJP3
14mm (9/16") x 36 female spline.
Overall length 120mm x 60mm maximum rotating diameter.
£35.00
BALLOC
IVA Requirement.
£6.00
TWM105
FOR TAPER MOUNTING WIPER ARMS
£80.00
TWM85
FOR TAPER MOUNTING WIPER ARMS MAXIMUM TORQUE 6 nm
£80.00
HLHSW

Rotary Off-On-On-On, Push Horn.
Fits 12mm hole.
Spade terminals.
£10.00
CDS2064

SOLD BY THE INCH

£0.75
HDRIVER
£5.00
ABRUSH
102mm diameter x 20mm wide.
£8.00
BSSTD

1000 Amps for 5 seconds.
100 Amps continuous.
10mm ring terminals.
Two keys.
£7.50
UJG23
Ideal for gear linkages.
£14.00
DYNAMO3
12 Volt 11 Amp
£80.00
DYNAMO2
12 Volt, 22 Amp
£85.00
ALTE

Less than 100mm diameter. Light weight - only 3Kg and simple, two bolt mounting.

£98.00
MICRO

0-25mm

£10.00
BSFIA

1000 Amps for 5 seconds.
100 Amps continuous.
10mm ring terminals.
1/4" Spade terminals.
One key.
£20.00
M17CH

SOLD AS PAIR

£26.00
PICKUP
800mm telescopic, stainless steel shaft.
£7.00
WBWEDGL
Large 27mm dia, 16mm I.D. Max length 24mm.
£2.50
WBWEDGS
SMALL 24mm diameter, 16mm I.D. Maximum length 25mm.
£2.50
TWA300
FITS OUR COMPACT WIPER MOTOR.
£19.00
TWA400
FITS OUR COMPACT WIPER MOTOR.
£19.00
ANGLE900
No load speed 12,000 RPM. 115mm disc capacity head.
£34.00
TUBEST
Set of three
£19.00
CQTRIV14
Chrome head diameter 12mm. Shaft diameter 6mm.
£3.25
CQTRIV17
Chrome head diameter 12mm. Shaft diameter 6mm. Plate fixing hole centres 25mm.
£3.25
CQTRIV19
Chrome head diameter 12mm. Shaft diameter 6mm. Plate fixing hole centres 25mm.
£3.25
CQTRIV17BK
Head diameter 12mm. Shaft diameter 6mm. Plate fixing hole centres 25mm.
£3.25
CQTRIV19BK
Head diameter 12mm. Shaft diameter 6mm. Plate fixing hole centres 25mm.
£3.25
PSALC
For Corsa B Power Steering.
£40.00
SWH8
FIts Pre '77 Mini, Pre '69 MGB, Midget Mk2, MGA and MGC.
£30.00
SWH3
Spline diameter 15mm. 6 x 6mm diameter holes @ 101mm PCD. and 9 x 6mm diameter holes @ 101mm PCD
£25.00
SWH4
£38.00
SWH7
£32.00
SWH6
Six M5 tapped holes for steering wheel mounting @ 70mm PCD and six @ 73mm PCD.
£43.00
CQTRIV14BK
Head diameter 12mm. Shaft diameter 6mm.
£3.25
CQT14
Head diameter 12mm. Shaft diameter 6mm.
£3.25
QRSW6
For 70mm PCD
£28.00
DWRSW17
Centre hole 88mm. 6 x 6mm boss mounting holes on a 101mm (4") PCD.
£135.00
CQT17
Head diameter 12mm. Shaft diameter 6mm.
£3.25
CQT19
Head diameter 12mm. Shaft diameter 6mm.
£3.25
WRSW70
3 Diameters. 13" 14" 15"
Six, 5mm boss mounting holes on a 70mm PCD.
£90.00
CQT14BK
Head diameter 12mm. Shaft diameter 6mm.
£3.25
CQT19BK
Head diameter 12mm. Shaft diameter 6mm.
£3.25
CQT17BK
Head diameter 12mm. Shaft diameter 6mm.
£3.25
SSADAPT1
Fits #QRSW.
Wheel mounting has 6 x 5.5mm holes on a 101mm (4") PCD.
Boss mounting has 3 x 6.2mm holes on a 45mm PCD and 3 x 5mm holes on a 50mm PCD.
£18.00
SSADAPT2
Fits #QRSW2
£18.00
SSADAPT3
Fits #QRSW
£18.00
SGAT2
Cut to suit your rack and track rod.
£8.00
SGAT
Cut to suit your rack and track rod.
£8.00
ST300NAT
Six M5 x 15mm stainless button head fixing screws on a 70mm PCD.
£49.00
ST320NAT
Six M5 x 15mm stainless button head fixing screws on a 70mm PCD.
£45.00
WRSW14
Centre hole 88mm. 6 x 6mm boss mounting holes on a 101mm (4") PCD.
£110.00
WRSW15
Centre hole 88mm. 6 x 6mm boss mounting holes on a 101mm (4") PCD.
£99.00
UJCHR
Both ends have the popular 14mm (9/16") x 36 female spline. Overall length 93mm long x 41mm diameter. 30 degree operating angle.
£36.00
ST320BK
Six M5 x 15mm stainless button head fixing screws on a 70mm PCD.
£49.00
ST250FBL
Six M5 x 15mm stainless button head fixing screws on a 70mm PCD.
£75.00
ST250FBS
Six M5 x 15mm stainless button head fixing screws on a 70mm PCD.
£75.00
ST30070
Six 5.5mm countersunk holes on 70mm PCD. 56mm centre hole.
£90.00
ST300UND
Drill to suit your boss.
£90.00
ST350S
Six 5.5mm countersunk holes on 70mm PCD.
56mm centre hole.
£90.00
ST345NAT
Six M5 x 15mm stainless button head fixing screws on a 70mm PCD.
£49.00
ST345BK
Six M5 x 15mm stainless button head fixing screws on a 70mm PCD.
£49.00
DWRSW13
Centre hole 88mm. 6 x 6mm boss mounting holes on a 101mm (4") PCD.
£110.00
DWRSW14
Centre hole 88mm. 6 x 6mm boss mounting holes on a 101mm (4") PCD.
£110.00
DWRSW15
Centre hole 88mm. 6 x 6mm boss mounting holes on a 101mm (4") PCD.
£110.00
ST330TYL
Six 6mm holes on 101mm (4") PCD.
89mm diameter centre hole.
£60.00
ST280BK
Six M5 x 15mm stainless button head fixing screws on a 70mm PCD.
£40.00
WRSW17
Centre hole 88mm. 6 x 6mm boss mounting holes on a 101mm (4") PCD.
£135.00
ST430LBK
Six 6mm holes on 101mm (4") PCD.
89mm diameter centre hole.
£80.00
ST430LAL
Six 6mm holes on 101mm (4") PCD.
89mm diameter centre hole.
£80.00
ST275
Drill to suit your boss.
£80.00
ST300LEA
Six 5.5mm countersunk holes on 70mm PCD. 56mm centre hole.
£90.00
ST330LEA
Six 5.5mm countersunk holes on 70mm PCD. 56mm centre hole.
£90.00
ST350LEA
Six 5.5mm countersunk holes on 70mm PCD. 56mm centre hole.
£90.00