CHROME QUARTER TURN FASTENER WITH RIVETED BACKING PLATE.
The plate (receiver) is slid over the edge of the lower panel which can be up to 3mm thick,
secured with two rivets (supplied) and an 8mm clearance hole is drilled through the panel.
An 6mm hole is drilled through the top panel and the fastener is pushed through and
twisted just a quarter of a turn, locking it in place.
A rubber washer prevents vibration and protects the top panel's surface.
If your lower panel is very thin you can use a 'Doubler' - a small piece of panel glued
to the first to increase it's thickness.
Chrome head diameter 12mm.
Shaft diameter 6mm.
Plate fixing hole centres 25mm.
Hole centre distance from edge of lower panel 12mm.
CHROME QUARTER TURN FASTENER WITH RIVETS FOR 4mm TOP PANELS #CQT14R
