Search
Filters
Close

Crimp from 6mm to 16mm diameter ring terminals.
120
Part Number: CRPPNC
£22.20 incl VAT
excluding shipping

80 BATTERY CABLE CRIMPING TOOL

Here's an inexpensive and very simple crimper for battery cable ring terminals

between 6mm diameter and 16mm diameter (8 AWG to 4.0 AWG).

Just trim off the cable insulation so that the copper fits fully into the terminal,

locate the assembled cable and terminal in the tool, below the sprung-loaded anvil

and whack the anvil with a hammer (on a solid surface) until the joint is tight and secure.

Hardened steel jaws and plated anvil.

Weight 685gms.

BATTERY CABLE CRIMPING TOOL #CRPPNC

80 BATTERY CABLE CRIMPING TOOL

Here's an inexpensive and very simple crimper for battery cable ring terminals

between 6mm diameter and 16mm diameter (8 AWG to 4.0 AWG).

Just trim off the cable insulation so that the copper fits fully into the terminal,

locate the assembled cable and terminal in the tool, below the sprung-loaded anvil

and whack the anvil with a hammer (on a solid surface) until the joint is tight and secure.

Hardened steel jaws and plated anvil.

Weight 685gms.

BATTERY CABLE CRIMPING TOOL #CRPPNC

Write your own review
  • Bad
  • Excellent