Search
English
All Categories
    Menu Close

    REAR FOG LIGHT CONTROLLER for new IVA rules

    IVA OK 

    Part Number: RFLATCH
    Additional Information
    £36.00
    excluding shipping
    i h

    NEW IVA REAR FOG RULES 

    In June 2013 the rules for switching on and off your Rear Fog Lights changed. 

    Now, the Rear Fog lamps must only be lit when the Dipped Beam, Main Beam or

    Front Fog lamps are lit. The Rear Fog Lamps may continue to operate until the

    other lights are switched off. The rear fog lamps must then remain off, even if

    the other lights are switched on again, until they are deliberately switched on again. 

    This is to prevent people driving off to work in the morning with the rear fog lights

    glaring after forgetting to switch them off the foggy evening before.

    Just follow the instructions and connect the four wires of this simple little module

    into your lighting circuit and you'll comply. Job done.

    Supply voltage:  +9v to +14 v dc.

    Circuit idle current:  3 to 5 ma.

    Maximum switched load:  2 Amps  (1 x 21 watt bulb)

    Case size:  40mm x 30mm x 20mm.

    REAR FOG LIGHT CONTROLLER #RFLATCH

    5.0 1
    Write your own review Close
    *
    *
    • Bad
    • Excellent
    Keith | 30/12/2013 21:25
    Great
    Great product, saves having to rewire the rear fog lights.
    Was this review helpful? Yes No (0/0)
    *
    *
    *

    NEW IVA REAR FOG RULES 

    In June 2013 the rules for switching on and off your Rear Fog Lights changed. 

    Now, the Rear Fog lamps must only be lit when the Dipped Beam, Main Beam or

    Front Fog lamps are lit. The Rear Fog Lamps may continue to operate until the

    other lights are switched off. The rear fog lamps must then remain off, even if

    the other lights are switched on again, until they are deliberately switched on again. 

    This is to prevent people driving off to work in the morning with the rear fog lights

    glaring after forgetting to switch them off the foggy evening before.

    Just follow the instructions and connect the four wires of this simple little module

    into your lighting circuit and you'll comply. Job done.

    Supply voltage:  +9v to +14 v dc.

    Circuit idle current:  3 to 5 ma.

    Maximum switched load:  2 Amps  (1 x 21 watt bulb)

    Case size:  40mm x 30mm x 20mm.

    REAR FOG LIGHT CONTROLLER #RFLATCH

    Product tags
    You may also be interested in the following product(s)
    Picture of 6.5mm Female Terminal For Micro Relay Module
    Picture of 3mm Female Terminal For Micro Relay Module

    3mm Female Terminal For Micro Relay Module

    TERRLYS
    SOLD SINGLY
    £0.34
    Picture of Ring Terminal 8mm Hole for 35mm² Battery Cable
    Picture of Ring Terminal 8mm Hole for 16mm² Battery Cable

    Ring Terminal 8mm Hole for 16mm² Battery Cable

    RT816

    For 16mm² battery cable.
    8mm ring.
    £0.60