Search
+ 44 (0)1580 891309 | + 44 (0)1580 448007 | + 44 (0)1580 448017
English
All Categories
    Menu Close

    Plain Black Billet Aluminium Switch Red Illumination

    With single pole switch.

    Part Number: PBPLRBK
    £21.60
    excluding shipping
    i h

    Here we have one of the latest editions to our range of Billet Aluminium Switches and Warning Lights.

    These superb CNC alloy switches are finished in satin black and have a 10mm wide

    alloy collar which allows two mounting option. 1. With the bezel 10mm above the panel

    or,  2. Flush mounting for IVA compliance.

    The face of the switch is not engraves but left plain for you to add your own legend.

     All switches have a single illumination as standard so can be wired to either illuminate

    with sidelights 'ON' or to illuminate with the switch itself in the 'ON' position.  

    However a 'Dim/Bright' kit (BSWDIM) is avaliable to provide a dim illumination

    when your sidelights are on and then a bright illumination when the switch is activated.

    PLAIN Black Billet Aluminium Switch With RED Illumination.

    • RED LED Illumination
    • Latching
    • 18" Male spade terminals
    • Single Pole Contact Block

    With Alloy Collar..

    • Dash Projection 12mm
    • Rear Projection 40mm
    • Fitting hole size 15mm

    Without Alloy Collar..

    • Dash Projection 1.5mm
    • Rear Projection 51mm
    • Fitting hole size 23mm

    Overall Dimensions..

    • Collar Width 25mm
    • Body Width 15mm
    • Overall Length 52mm

    ALL SWITCHES EXCEPT HAZARD ARE SUPPLIED WITH A SINGLE POLE CONTACT BLOCK

    PLAIN BLACK BILLET ALUMINIUM SWITCH WITH RED ILLUMINATION #PBPLRBK

    0.0 0
    Write your own review Close
    *
    *
    • Bad
    • Excellent
    *
    *
    *

    Here we have one of the latest editions to our range of Billet Aluminium Switches and Warning Lights.

    These superb CNC alloy switches are finished in satin black and have a 10mm wide

    alloy collar which allows two mounting option. 1. With the bezel 10mm above the panel

    or,  2. Flush mounting for IVA compliance.

    The face of the switch is not engraves but left plain for you to add your own legend.

     All switches have a single illumination as standard so can be wired to either illuminate

    with sidelights 'ON' or to illuminate with the switch itself in the 'ON' position.  

    However a 'Dim/Bright' kit (BSWDIM) is avaliable to provide a dim illumination

    when your sidelights are on and then a bright illumination when the switch is activated.

    PLAIN Black Billet Aluminium Switch With RED Illumination.

    • RED LED Illumination
    • Latching
    • 18" Male spade terminals
    • Single Pole Contact Block

    With Alloy Collar..

    • Dash Projection 12mm
    • Rear Projection 40mm
    • Fitting hole size 15mm

    Without Alloy Collar..

    • Dash Projection 1.5mm
    • Rear Projection 51mm
    • Fitting hole size 23mm

    Overall Dimensions..

    • Collar Width 25mm
    • Body Width 15mm
    • Overall Length 52mm

    ALL SWITCHES EXCEPT HAZARD ARE SUPPLIED WITH A SINGLE POLE CONTACT BLOCK

    PLAIN BLACK BILLET ALUMINIUM SWITCH WITH RED ILLUMINATION #PBPLRBK

    You may also be interested in the following product(s)
    Picture of 6.5mm Female Terminal For Micro Relay Module
    Picture of Single Female Terminal For Mini Fuse Module 1mm to 2mm Wire
    Picture of Black Billet Aluminium Switch Rear Fog

    Black Billet Aluminium Switch Rear Fog

    PBRFBK

    Two mounting options.

    £21.60
    Picture of Billet Aluminium Switch 1/8" Female Spade Terminals
    Close