Search
English
All Categories
    Menu Close

    PILLOW BLOCK 19mm I.D.

    For 19mm diameter shaft
    Part Number: PIL19

    £14.40
    excluding shipping
    i h

    For 19mm diameter shaft. 

    Pillow block are used as floating supports for rotating shafts.

    This one has a sealed ball bearing with a spherical outer casing

    that floats up to 15 degrees in it’s cast iron housing

    Can be used as a mid-support for long, 15mm diameter, steering columns. 

    Footprint 127mm x 39mm. 65mm high. 

    Two 12mm mounting holes at 95mm centres.

    Grease nipple.

    Two grub screws to secure the shaft to the bearing inner race. 

    NOTE: SHAFT NOT INCLUDED

    NOTE: SOME STEERING COLUMNS ‘OSCILLATE’ WHEN TURNING.

    THIS ITEM IS UNSUITABLE FOR THESE COLUMNS.

    ENSURE THAT THE SECTION OF STEERING COLUMN YOU INTEND TO SUPPORT

    WITH A PILLOW BLOCK ROTATES ONLY ON IT’S OWN AXIS AND DOES NOT OSCILLATE.

    PILLOW BLOCK 19mm I.D. #PIL19

     

     

    For 19mm diameter shaft. 

    Pillow block are used as floating supports for rotating shafts.

    This one has a sealed ball bearing with a spherical outer casing

    that floats up to 15 degrees in it’s cast iron housing

    Can be used as a mid-support for long, 15mm diameter, steering columns. 

    Footprint 127mm x 39mm. 65mm high. 

    Two 12mm mounting holes at 95mm centres.

    Grease nipple.

    Two grub screws to secure the shaft to the bearing inner race. 

    NOTE: SHAFT NOT INCLUDED

    NOTE: SOME STEERING COLUMNS ‘OSCILLATE’ WHEN TURNING.

    THIS ITEM IS UNSUITABLE FOR THESE COLUMNS.

    ENSURE THAT THE SECTION OF STEERING COLUMN YOU INTEND TO SUPPORT

    WITH A PILLOW BLOCK ROTATES ONLY ON IT’S OWN AXIS AND DOES NOT OSCILLATE.

    PILLOW BLOCK 19mm I.D. #PIL19

     

     

    Product tags
    Close