Search
Filters
Close

4.5-5.5 psi. 132 ltrs/hr

For engines up to 150 BHP
Part Number: FAC6
£84.00 incl VAT
excluding shipping

Sealed, reliable solid state internals. 12 volt. Requires separate earth connection to pump body via fixing bolt.

Less than 2 amp current drain.

Will self prime up to 1 mtr lift.

Footprint 140mm x 82mm x 85mm high (without unions).

2 bolt fixing at 65mm centres.

Removable, washable internal nylon filter.

Weight 760gm.

Operating temperature range -60 to +43 deg C.  

Will pump from 4.5 psi to 5.5 psi.

Flow rate 113 ltrs/hour (30 US gal/hr.)

Union thread size 1/8" npt female. PIPE UNIONS NOT INCLUDED

IMPORTANT NOTE: ALL FUEL PUMPS MUST BE FITTED WITH A PRE-FILTER ON THE INLET SIDE.

RETURNED PUMPS WILL NOT BE REPLACED OR REFUNDED IF FOUND DAMAGED DUE TO DEBRIS.

FACET SILVER TOP  ROAD CYLINDRICAL SOLID STATE PUMP #FAC6

Sealed, reliable solid state internals. 12 volt. Requires separate earth connection to pump body via fixing bolt.

Less than 2 amp current drain.

Will self prime up to 1 mtr lift.

Footprint 140mm x 82mm x 85mm high (without unions).

2 bolt fixing at 65mm centres.

Removable, washable internal nylon filter.

Weight 760gm.

Operating temperature range -60 to +43 deg C.  

Will pump from 4.5 psi to 5.5 psi.

Flow rate 113 ltrs/hour (30 US gal/hr.)

Union thread size 1/8" npt female. PIPE UNIONS NOT INCLUDED

IMPORTANT NOTE: ALL FUEL PUMPS MUST BE FITTED WITH A PRE-FILTER ON THE INLET SIDE.

RETURNED PUMPS WILL NOT BE REPLACED OR REFUNDED IF FOUND DAMAGED DUE TO DEBRIS.

FACET SILVER TOP  ROAD CYLINDRICAL SOLID STATE PUMP #FAC6

Write your own review
  • Bad
  • Excellent