Search
Filters
Close

6.5-8psi 151 ltrs/hr

For engines over 200 BHP
Part Number: FAC4
£88.80 incl VAT
excluding shipping

Sealed, reliable solid state internals. 12 volt. Requires separate earth connection to pump body via fixing bolt.

Less than 2 amp current drain.

Will self prime up to 1 mtr lift.

Footprint 140mm x 82mm x 85mm high (without unions).

2 bolt fixing at 65mm centres.

Removable, washable internal nylon filter.

Weight 760gm.

Operating temperature range -60 to +43 deg C.  

Will pump from 6.5 psi to 8 psi. Flow rate 151 ltrs/hour (35 US gal/hr.)

Union thread size 1/4" npt. PIPE UNIONS NOT INCLUDED

 IMPORTANT NOTE: All fuel pumps must be fitted with a pre-filter on the inlet side.

Returned pumps will not be replaced or refunded if found damaged due to debris.

FACET RED TOP COMPETITION CYLINDRICAL SOLID STATE PUMP #FAC4

Sealed, reliable solid state internals. 12 volt. Requires separate earth connection to pump body via fixing bolt.

Less than 2 amp current drain.

Will self prime up to 1 mtr lift.

Footprint 140mm x 82mm x 85mm high (without unions).

2 bolt fixing at 65mm centres.

Removable, washable internal nylon filter.

Weight 760gm.

Operating temperature range -60 to +43 deg C.  

Will pump from 6.5 psi to 8 psi. Flow rate 151 ltrs/hour (35 US gal/hr.)

Union thread size 1/4" npt. PIPE UNIONS NOT INCLUDED

 IMPORTANT NOTE: All fuel pumps must be fitted with a pre-filter on the inlet side.

Returned pumps will not be replaced or refunded if found damaged due to debris.

FACET RED TOP COMPETITION CYLINDRICAL SOLID STATE PUMP #FAC4

Write your own review
  • Bad
  • Excellent