Search
+ 44 (0)1580 891309 | + 44 (0)1580 448007 | + 44 (0)1580 448017
English
All Categories
    Menu Close

    Dynamat Subwoofer Trunk Kit 5 X 4FT

    The Dynamat Mega Pack contains five sheets each 4ft square giving total 20 square foot coverage
    Part Number: DYN19405
    £72.00
    excluding shipping
    i h

    DYNAMAT SUBWOOFER TRUNK KIT 

    This is a heavy, composite, Butyl / Aluminium, high-temperature, self-adhesive sheet

    that will dampen, reinforce and stabilise your vehicle's panels to reduce vibration and road noise

    and allow clearer, louder bass from you car's audio system.

    Just cut to size, peel-off the backing and stick it on.  

    It is flexible, easy to cut and mould sheets which conform to curves and

    bond easily to sheet metal and other hard surfaces.

    Suitable for use in temperatures between -10°C to +60°C (14°F to+140°F).

    Material can withstand temperature extremes between -54°C to +149°C (-65°F to +300°F) and 

    is highly resistant to aging. 

    Pack contains Five Sheets, 4sq. ft. each (0.37 sq. mtrs).

    Total 1.85 sq. mtrs.  20 sq ft.

    Weight 4.8 Kg.

    DYNAMAT SUBWOOFER TRUNK KIT #DYN19405


    Acoustic Properties:
    The acoustic loss factor "n" is used as a measure of a material's ability to damp structure-borne sound

    by stating how much vibrational energy (in steel sheets for instance) is converted to heat rather than sound.

    For constructions containing several layers of damping material, the combined loss factor "n comb" is used.

    The theoretical maximum loss factor is 1 (no vibration).

    An undamped 1mm thick steel panel has a loss factor of roughly 0.001 at 200 Hz.

    Dynamat Xtreme applied to that panel would increase the loss factor to 0.417 @ +20°C (+68°F).

    Multiple layers of Dynamat Xtreme improve sound damping even more.

    Installation:
    Use scissors, knife or die to cut Dynamat Xtreme to the desired size and shape before removing the release liner.

    Next, remove dust, grease, moisture, and other foreign matter from the application surface.

    Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge.

    Press the mat firmly into place, using a roller for larger pieces.

    The roller reduces the risk of leaving air pockets, which reduce Dynamat's sound damping capacity.

    The temperature of the mat and application surface should not be below room temperature during fitting.

    Heating the material is not necessary.

     

    0.0 0
    Write your own review Close
    *
    *
    • Bad
    • Excellent
    *
    *
    *

    DYNAMAT SUBWOOFER TRUNK KIT 

    This is a heavy, composite, Butyl / Aluminium, high-temperature, self-adhesive sheet

    that will dampen, reinforce and stabilise your vehicle's panels to reduce vibration and road noise

    and allow clearer, louder bass from you car's audio system.

    Just cut to size, peel-off the backing and stick it on.  

    It is flexible, easy to cut and mould sheets which conform to curves and

    bond easily to sheet metal and other hard surfaces.

    Suitable for use in temperatures between -10°C to +60°C (14°F to+140°F).

    Material can withstand temperature extremes between -54°C to +149°C (-65°F to +300°F) and 

    is highly resistant to aging. 

    Pack contains Five Sheets, 4sq. ft. each (0.37 sq. mtrs).

    Total 1.85 sq. mtrs.  20 sq ft.

    Weight 4.8 Kg.

    DYNAMAT SUBWOOFER TRUNK KIT #DYN19405


    Acoustic Properties:
    The acoustic loss factor "n" is used as a measure of a material's ability to damp structure-borne sound

    by stating how much vibrational energy (in steel sheets for instance) is converted to heat rather than sound.

    For constructions containing several layers of damping material, the combined loss factor "n comb" is used.

    The theoretical maximum loss factor is 1 (no vibration).

    An undamped 1mm thick steel panel has a loss factor of roughly 0.001 at 200 Hz.

    Dynamat Xtreme applied to that panel would increase the loss factor to 0.417 @ +20°C (+68°F).

    Multiple layers of Dynamat Xtreme improve sound damping even more.

    Installation:
    Use scissors, knife or die to cut Dynamat Xtreme to the desired size and shape before removing the release liner.

    Next, remove dust, grease, moisture, and other foreign matter from the application surface.

    Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge.

    Press the mat firmly into place, using a roller for larger pieces.

    The roller reduces the risk of leaving air pockets, which reduce Dynamat's sound damping capacity.

    The temperature of the mat and application surface should not be below room temperature during fitting.

    Heating the material is not necessary.

     

    Product tags
    You may also be interested in the following product(s)
    Picture of M4 Rubber Rivnuts Pack Of 10

    M4 Rubber Rivnuts Pack Of 10

    RUBNUT4

    PACK OF 10

    £4.80
    Picture of 108mm Fuel Filter Glass & Chrome With 8mm Hose Tails

    108mm Fuel Filter Glass & Chrome With 8mm Hose Tails

    FFGL8

    8mm hose tails.
    Can be dismantled for cleaning.
    £12.00
    Picture of Brake Fluid Filler Hose 7mm Per Mtr

    Brake Fluid Filler Hose 7mm Per Mtr

    BFHOSE

    SOLD BY THE METRE

    £8.40
    Picture of Black Gauge Pod Double

    Black Gauge Pod Double

    GP2

    Suits 2" 51mm Gauges.

    £6.00
    Close