Search
+ 44 (0)1580 891309 | + 44 (0)1580 448007 | + 44 (0)1580 448017
English
All Categories
    Menu Close

    Chrome Quarter Turn Fastener for 10mm Top Panels

    Head diameter 12mm. Shaft diameter 6mm.

    Part Number: CQT19
    £3.60
    excluding shipping
    i h

    CHROME  QUARTER TURN FASTENER WITH BACKING PLATE.

    These quarter-turn fasteners were designed as a quick-release fixing for two panels.

    The plate (receiver) is slid over the edge of the lower panel (can be up to 3mm thick)

    and a 9mm clearance hole is drilled through.

    A 6mm hole is drilled through the top panel and the fastener is pushed through and twisted

    just a quarter of a turn, locking the panels together.

    A rubber washer prevents vibration and protects the top panel's surface.

    If your lower panel is very thin you can use a 'Doubler' - a small piece of panel glued to the first

    to increase it's thickness.

    Head diameter 12mm.

    Shaft diameter 6mm.

    Hole centre distance from edge of lower panel 13mm.

    A selection of sizes are available for different thicknesses of top panel.

    If your top panel is thinner than the designated size you can add rubber washers under the head of the fastener.

    CHROME QUARTER TURN FASTENER FOR 10mm TOP PANELS #CQT19 

    0.0 0
    Write your own review Close
    *
    *
    • Bad
    • Excellent
    *
    *
    *

    CHROME  QUARTER TURN FASTENER WITH BACKING PLATE.

    These quarter-turn fasteners were designed as a quick-release fixing for two panels.

    The plate (receiver) is slid over the edge of the lower panel (can be up to 3mm thick)

    and a 9mm clearance hole is drilled through.

    A 6mm hole is drilled through the top panel and the fastener is pushed through and twisted

    just a quarter of a turn, locking the panels together.

    A rubber washer prevents vibration and protects the top panel's surface.

    If your lower panel is very thin you can use a 'Doubler' - a small piece of panel glued to the first

    to increase it's thickness.

    Head diameter 12mm.

    Shaft diameter 6mm.

    Hole centre distance from edge of lower panel 13mm.

    A selection of sizes are available for different thicknesses of top panel.

    If your top panel is thinner than the designated size you can add rubber washers under the head of the fastener.

    CHROME QUARTER TURN FASTENER FOR 10mm TOP PANELS #CQT19 

    You may also be interested in the following product(s)
    Picture of Chrome 'U' Channel Edge Trim 7mm x 5mm Per Metre

    Chrome 'U' Channel Edge Trim 7mm x 5mm Per Metre

    TRMCU6

    SOLD BY THE METRE

    £3.60
    Picture of Chrome Quarter Turn Fastener for 4mm Top Panels

    Chrome Quarter Turn Fastener for 4mm Top Panels

    CQT14

    Head diameter 12mm. Shaft diameter 6mm.

    £3.60
    Picture of 10mm ID Black Temprotect Sleeving Per Metre

    10mm ID Black Temprotect Sleeving Per Metre

    TP10BK

    SOLD BY THE METRE

    Ideal for protecting small cables and wires close to hot exhaust/engines.

    £4.80
    Picture of 13mm ID Black Temprotect Sleeving Per Metre

    13mm ID Black Temprotect Sleeving Per Metre

    TP13BK

    SOLD BY THE METRE
    Slide over your pipes, wiring looms etc to protect from high heat areas.

    £10.80
    Close