Search
English
All Categories
    Menu Close

    Carbon Fibre Effect Single Round Lamp Housing 120mm

    120mm diameter x 65mm high.

    Part Number: HOU1

     

    £14.40
    excluding shipping
    i h

    These moulded ABS housings are designed to accept our 95mm diameter rear lamps. The housings can be trimmed to an angle for mounting the lamps vertically on a sloping rear panel. Material thickness approximately 2mm.

    The cut edge can be trimmed with our #TRMU2 rubber ‘U’ channel and the whole assembly can be secured with long M4 fixings requiring drilling of only small holes in your bodywork.

    120mm diameter x 65mm high

    (shown above fitted with a red #RL17)

    CARBON FIBRE EFFECT LAMP HOUSINGS SINGLE #HOU1

    These moulded ABS housings are designed to accept our 95mm diameter rear lamps. The housings can be trimmed to an angle for mounting the lamps vertically on a sloping rear panel. Material thickness approximately 2mm.

    The cut edge can be trimmed with our #TRMU2 rubber ‘U’ channel and the whole assembly can be secured with long M4 fixings requiring drilling of only small holes in your bodywork.

    120mm diameter x 65mm high

    (shown above fitted with a red #RL17)

    CARBON FIBRE EFFECT LAMP HOUSINGS SINGLE #HOU1

    Product tags