Suche
German
All Categories
    Menu Close

    PILLOW BLOCK 15mm I.D.

    For 15mm Diameter Shaft
    Artikelnummer: PIL15

     

    £12.00
    excluding shipping
    i h

    For 15mm diameter shaft. 

    Pillow block are used as floating supports for rotating shafts.

    This one has a sealed ball bearing with a spherical outer casing

    that floats up to 15 degrees in it’s cast iron housing

    Can be used as a mid-support for long, 15mm diameter, steering columns. 

    Footprint 125mm x 32mm. 58mm high. 

    Two 11mm mounting holes at 95mm centres.

    Grease nipple.

    Two grub screws to secure the shaft to the bearing inner race. 

    NOTE: SHAFT NOT INCLUDED

    NOTE: SOME STEERING COLUMNS ‘OSCILLATE’ WHEN TURNING.

    THIS ITEM IS UNSUITABLE FOR THESE COLUMNS.

    ENSURE THAT THE SECTION OF STEERING COLUMN YOU INTEND TO SUPPORT

    WITH A PILLOW BLOCK ROTATES ONLY ON IT’S OWN AXIS AND DOES NOT OSCILLATE.

    PILLOW BLOCK 15mm I.D. #PIL15

     

     

    For 15mm diameter shaft. 

    Pillow block are used as floating supports for rotating shafts.

    This one has a sealed ball bearing with a spherical outer casing

    that floats up to 15 degrees in it’s cast iron housing

    Can be used as a mid-support for long, 15mm diameter, steering columns. 

    Footprint 125mm x 32mm. 58mm high. 

    Two 11mm mounting holes at 95mm centres.

    Grease nipple.

    Two grub screws to secure the shaft to the bearing inner race. 

    NOTE: SHAFT NOT INCLUDED

    NOTE: SOME STEERING COLUMNS ‘OSCILLATE’ WHEN TURNING.

    THIS ITEM IS UNSUITABLE FOR THESE COLUMNS.

    ENSURE THAT THE SECTION OF STEERING COLUMN YOU INTEND TO SUPPORT

    WITH A PILLOW BLOCK ROTATES ONLY ON IT’S OWN AXIS AND DOES NOT OSCILLATE.

    PILLOW BLOCK 15mm I.D. #PIL15

     

     

    Tags
    Benutzer, die diesen Artikel gekauft haben, haben auch gekauft
    Bild von Kaltgezogenes Stahlrohr

    Kaltgezogenes Stahlrohr

    CDS2064

    PRO ZOLL VERKAUFT

    £0.90
    Bild von Universelle Lenksäulenverbindung Geschmiedet

    Universelle Lenksäulenverbindung Geschmiedet

    UJF
    Size 80mm x 38mm.
    14mm (9/16") x 36 spline at both ends.
    £33.60
    Bild von 600mm Long Double Ended Splined Shaft

    600mm Long Double Ended Splined Shaft

    SPLINED600
    600mm LONG
    £38.40
    Bild von Keilwelle Doppeltes Ende

    Keilwelle Doppeltes Ende

    SPLINED400

    400mm LANG

    £34.80