Sealed, reliable solid state internals. 12 volt. Requires separate earth connection to pump body via fixing bolt.
Less than 2 amp current drain.
Will self prime up to 1 mtr lift.
Footprint 140mm x 82mm x 85mm high (without unions).
2 bolt fixing at 65mm centres.
Removable, washable internal nylon filter.
Operating temperature range -60 to +43 deg C.
Will pump from 6.5 psi to 8 psi. Flow rate 151 ltrs/hour (35 US gal/hr.)
Union thread size 1/4" npt. PIPE UNIONS NOT INCLUDED
IMPORTANT NOTE: All fuel pumps must be fitted with a pre-filter on the inlet side.
Returned pumps will not be replaced or refunded if found damaged due to debris.
FACET RED TOP COMPETITION CYLINDRICAL SOLID STATE PUMP #FAC4