Power Brake Bleeder 750ml

Here is all you need to bleed your brakes or replace all the fluid in your system.

Just part-fill the 0.75 litre, 'new fluid' container and invert it over your reservoir using one of the four adapters supplied, connect an air line from your workshop compressor to the trigger assembly, loosen a bleed screw, push on the black rubber adapter and pull the trigger.

Venturi effect draws fluid through the 2 metre clear tube and into the 750ml, 'old fluid' container.

When all the bubbles are clear from the fluid in the pipe, just tighten the bleed screw and it's done.

Clean and easy. You don't even have to touch your pedals.

Repeat for each cylinder or caliper.

Air line union and full instructions included.

POWER BRAKE BLEEDER #POBRBL