Search
Filters
Close

INSTALLATION GUIDE IN THE CATALOGUE

Part Number: AIRCON2
£342.00 incl VAT
excluding shipping

If you already have a heater and you just want to install Air Conditioning in you car, here's a compact yet powerful underdash package. Size 360mm x 290mm x 150mm - . Straightforward installation with our detailed instructions. Cooling capacity 10,800 BTU. Maximum air flow 200 cfm.
Universal kit includes:

  • Under-dash unit with double squirrel cage, three - speed fan, pre-fitted expansion valve and two rocking vane outlet vents on the front facia. 
  • Remote fan speed and temperature control panel pre-wired to harness. Pre-assembled to mounting bracket or can be disassembled for through-the-dash mounting. 
  • Desiccant drier with Trinary safety/radiator fan switch. 
  • Complete set of hose unions, ‘O’ rings and charging/serviceports. (Hoses not included but we can supply)
  • Mounting brackets, drain hose and fused power feed cable. 

NOTE: Installation requires engine- driven compressor and condensing radiator (possibly with cooling fan). Hose lengths can be determined and purchased after installation of components. See your local yellow pages for car Air Conditioning specialists who will charge and test the system for you.

 

IF YOU PREFER THE FRONT OF THE UNIT CAN BE REPLACED WITH A PLENUM WITH 4, 63mm HOSE OUTLETS ON. THIS CAN THEN BE DUCTED TO DASH VENTS

NOTE: We can now offer a crimping service for your hoses. For just £50 we will collect your boxed-up hoses and unions,

crimp them and send them back to you. Full instructions on how to prepare the hoses and unions will be sent with the kit.

UNIVERSAL AIR CONDITIONING KIT #AIRCON2

If you already have a heater and you just want to install Air Conditioning in you car, here's a compact yet powerful underdash package. Size 360mm x 290mm x 150mm - . Straightforward installation with our detailed instructions. Cooling capacity 10,800 BTU. Maximum air flow 200 cfm.
Universal kit includes:

  • Under-dash unit with double squirrel cage, three - speed fan, pre-fitted expansion valve and two rocking vane outlet vents on the front facia. 
  • Remote fan speed and temperature control panel pre-wired to harness. Pre-assembled to mounting bracket or can be disassembled for through-the-dash mounting. 
  • Desiccant drier with Trinary safety/radiator fan switch. 
  • Complete set of hose unions, ‘O’ rings and charging/serviceports. (Hoses not included but we can supply)
  • Mounting brackets, drain hose and fused power feed cable. 

NOTE: Installation requires engine- driven compressor and condensing radiator (possibly with cooling fan). Hose lengths can be determined and purchased after installation of components. See your local yellow pages for car Air Conditioning specialists who will charge and test the system for you.

 

IF YOU PREFER THE FRONT OF THE UNIT CAN BE REPLACED WITH A PLENUM WITH 4, 63mm HOSE OUTLETS ON. THIS CAN THEN BE DUCTED TO DASH VENTS

NOTE: We can now offer a crimping service for your hoses. For just £50 we will collect your boxed-up hoses and unions,

crimp them and send them back to you. Full instructions on how to prepare the hoses and unions will be sent with the kit.

UNIVERSAL AIR CONDITIONING KIT #AIRCON2

Write your own review
  • Bad
  • Excellent