Steering Components

Filters
per page
UJP2
Both ends have the popular 14mm (9/16") x 36 female spline.
Overall length 93mm long x 42mm maximum diameter.
£26.40
516UNCSKT
For use with our steering UJ's.
£1.20
516UNFBN
For use with our steering UJ's.
£1.80
SWH8
FIts Pre '77 Mini, Pre '69 MGB, Midget Mk2, MGA and MGC.
£36.00
SWH1
21mm diameter splined shaft fitting.
Two sets of 6 holes for steering wheel mounting @ 70mm PCD (Momo) and 74mm PCD (Nardi).
£45.60
SWH7
£38.40
SWH4
£45.60
SWH3
Spline diameter 15mm. 6 x 6mm diameter holes @ 101mm PCD. and 9 x 6mm diameter holes @ 101mm PCD
£30.00
SWH2
Tapered hexagon shaft fitting starting at 17mm across the flats.
Two sets of 6 holes for steering wheel mounting @ 70mm PCD (Momo) and 74mm PCD (Nardi).
£51.60
SWH6
Six M5 tapped holes for steering wheel mounting @ 70mm PCD and six @ 73mm PCD.
£51.60
QRSW3
With 67mm long splined weld-on shaft
£78.00
QRSW6
For 70mm PCD
£33.60
QRSW
Hexagonal shaft adapter (I.D. 19mm) is welded to the top of your steering column.
£61.20
QRSW2
Three M8 female threads on a 45mm PCD. for mounting your steering wheel via a simple adapter plate.
Comes with a matching, hex steel sleeve for welding to the top of your steering column.
£36.00
STKNOB
Rubber sleeve supplied allows fitting to wheel rims up to 35mm diameter.
Wheel rims below 32mm diameter may require additional rubber packing.
£12.60
SSADAPT2
Fits #QRSW2
£21.60
SSADAPT1
Fits #QRSW.
Wheel mounting has 6 x 5.5mm holes on a 101mm (4") PCD.
Boss mounting has 3 x 6.2mm holes on a 45mm PCD and 3 x 5mm holes on a 50mm PCD.
£21.60
SSADAPT3
Fits #QRSW
£21.60
SGAT
Cut to suit your rack and track rod.
£9.60
SGAT2
Cut to suit your rack and track rod.
£9.60