Search
Filters
Close

120mm diameter x 65mm high.

Part Number: HOU1BK
£12.00 incl VAT
excluding shipping

These moulded ABS housings are designed to accept our 95mm diameter rear lamps. The housings can be trimmed to an angle for mounting the lamps vertically on a sloping rear panel. Material thickness approximately 2mm.

The cut edge can be trimmed with our #TRMU2 rubber ‘U’ channel and the whole assembly can be secured with long M4 fixings requiring drilling of only small holes in your bodywork.

120mm diameter x 65mm high

(shown above fitted with a red #RL17)

BLACK LAMP HOUSINGS SINGLE #HOU1BK

These moulded ABS housings are designed to accept our 95mm diameter rear lamps. The housings can be trimmed to an angle for mounting the lamps vertically on a sloping rear panel. Material thickness approximately 2mm.

The cut edge can be trimmed with our #TRMU2 rubber ‘U’ channel and the whole assembly can be secured with long M4 fixings requiring drilling of only small holes in your bodywork.

120mm diameter x 65mm high

(shown above fitted with a red #RL17)

BLACK LAMP HOUSINGS SINGLE #HOU1BK

Write your own review
  • Bad
  • Excellent