Search
Filters
Close

ACCEPTS OUR #RLT7 to 12 and with a little simple modification (remove the fixing projections on the inside), our #RL40, 41 and 42.

Part Number: PLINTH2
£4.20 incl VAT
excluding shipping

RECESSED PLINTH Here's another option for mounting your 95mm rear lights.

Just cut a hole 88mm diameter in your panel and bond or screw-in the plinth.

The lamp is then fixed to the plinth with two small self-tappers. Height of plinth above surface is just 8mm.

Maximum diameter 99mm. Rear projection 16mm. ACCEPTS OUR #RLT7 to 12 and with a little

simple modification (remove the fixing projections on the inside), our #RL40, 41 and 42. 

RECESSED PLINTH FOR 95mm LAMPS #PLINTH2

RECESSED PLINTH Here's another option for mounting your 95mm rear lights.

Just cut a hole 88mm diameter in your panel and bond or screw-in the plinth.

The lamp is then fixed to the plinth with two small self-tappers. Height of plinth above surface is just 8mm.

Maximum diameter 99mm. Rear projection 16mm. ACCEPTS OUR #RLT7 to 12 and with a little

simple modification (remove the fixing projections on the inside), our #RL40, 41 and 42. 

RECESSED PLINTH FOR 95mm LAMPS #PLINTH2

Write your own review
  • Bad
  • Excellent