Product reviews for Multi Gauge Matcher 80mm Long

Existing reviews
How clever.
Guest 02/03/2023 16:15
Avatar
This simple bit of kit solved the mismatch issue. Simply wire it in, including the low warning light if you wish, fill the tank setting the levels as required and then set the gauge to read correctly. Problem solved.
Was this review helpful? Yes No (1/0)
One of those rare simple ideas that proves to be a game changer
Paul 15/02/2022 14:37
Avatar
Have fitted two of these now. One of which was used in conjunction with a fuel tank that that was re-fitted at a slant and not horizontally as original. Tank shape was also altered to clear steering rods. This little device allowed a perfect matching of tank level/sender output to the original gauge. So simple and easy to fit and set up. (Note analogue fuel gauge... ie with a pointer. Will not work with a fully digital system). Can also be used with temperature gauge or anything that has resistive measuring. Has anti slosh facility which can dampen gauge needle movement should you need this. Also has aux output that cna show low level and ultra low level via an indicator bulb/s. Or connect to a relay for tank switching etc.
Was this review helpful? Yes No (1/0)
Really good bit of kit
Guest 12/08/2017 21:54
Avatar
I have a 1960 mini which has the 90 Ohm sender, but when the sender failed I could only get a 240 Ohms sender.
This little box allowed me to calibrate the 90 Ohm gauge with the 240 Ohm sender to show the exact amount of fuel in the tank. Awesome !
Was this review helpful? Yes No (2/0)
Write your own review
*
*
  • Bad
  • Excellent