Existing reviews
Very Good
Paul 29/02/2024 15:01
Avatar
This gauge is inexpensive and does the job. It is intended for low pressure systems only - not fuel injection. There is a very good reason why pressure gauges are not left in place. They are intended for measurement purpose only. Should they fail and leak due to age, vibration, knocks etc then petrol is going to land somewhere and that may turn out to be a very hot surface. Always be safe rather than sorry.
Was this review helpful? Yes No (0/0)
Brilliant little gauge.
Roy 23/11/2021 18:23
Avatar
Brilliant little fuel pressure gauge for older carburettor cars.  It’s the only gauge I could find with a read out range specifically for low pressure pumps.  I have an American Holley four barrel carburettor with a bleed screw in the fuel line that this gauge screws right into. I wanted to check there’s adequate fuel pressure from the mechanical pump. It says this gauge is not for permanent use.. not really sure why?  The case/bezel appears to be durable stainless steel which looks nice with the easy to read white dial.
Was this review helpful? Yes No (0/0)
Write your own review
*
*
  • Bad
  • Excellent