Search
Filters
Close

Inlet thread M18 x 1.5mm.
Outlet thread male banjo M12 x 1.5mm.
Part Number: INJP5
£102.00 incl VAT
excluding shipping

FUEL INJECTION PUMP.

This pump is a replacement for the Bosch "044" Motorsport pump, the highest flowing

of the Bosch pumps that is often used in Motorsport applications.

13.5 volt. (12 volt)

Current drain max. approx 11 Amps

Flow rate: 265Lt/Hr @ 55 psi (3.9 bar)and 255Lt/Hr @ 75 psi (5.3 bar)

Inlet thread female M18 x 1.5mm

Outlet thread male banjo M12 x 1.5mm 

Diameter 60mm. 

Overall length 195mm. 

Electrical connection threads: Positive M6 / Negative M5

Supplied with boots and connectors.

Overall length 175mm.

IMPORTANT NOTE: ALL FUEL PUMPS MUST BE FITTED WITH A PRE-FILTER ON THE INLET SIDE. RETURNED PUMPS WILL NOT BE REPLACED OR REFUNDED IF FOUND DAMAGED DUE TO DEBRIS.

 

FUEL INJECTION PUMP #INJP5

FUEL INJECTION PUMP.

This pump is a replacement for the Bosch "044" Motorsport pump, the highest flowing

of the Bosch pumps that is often used in Motorsport applications.

13.5 volt. (12 volt)

Current drain max. approx 11 Amps

Flow rate: 265Lt/Hr @ 55 psi (3.9 bar)and 255Lt/Hr @ 75 psi (5.3 bar)

Inlet thread female M18 x 1.5mm

Outlet thread male banjo M12 x 1.5mm 

Diameter 60mm. 

Overall length 195mm. 

Electrical connection threads: Positive M6 / Negative M5

Supplied with boots and connectors.

Overall length 175mm.

IMPORTANT NOTE: ALL FUEL PUMPS MUST BE FITTED WITH A PRE-FILTER ON THE INLET SIDE. RETURNED PUMPS WILL NOT BE REPLACED OR REFUNDED IF FOUND DAMAGED DUE TO DEBRIS.

 

FUEL INJECTION PUMP #INJP5

Write your own review
  • Bad
  • Excellent