This adapter will convert the rotary motion of a speedo cable into 6 digital
pulses per revolution for an electronic speedometer.
It will accept a speedo inner cable between 2.2mm and 3mm square and it
has an M12 x 1mm male thread.
It is not necessary for the thread on the old speedo cable to exctly match the hread
on the adapter provided the square inner cable engages with the square drive hole
in the adapter - it can be held together with self-amalgamating tape - there is
very little rotational force when the drive is working.
Calculate and program your instrument in accordance with the manufacturer's instructions.
300mm lomng flylead. Weight 30gms.
(NOTE: Last picture shows #DSSA connected perfectly to the speedo drive cable on a Classic BSA Motorcycle)
WIRING: BLACK = Negative earth.
RED = +12 V Live,
WHITE = Signal Pulse out.
6 Pulses per revolution
DIGITAL SPEED SIGNAL ADAPTER #DSSA2