Manufactured for us to our own design and specification from 304 grade, 1.3mm stainless steel. Removable, spun end cap with a 95mm diameter, beaded tail pipe and 3mm thick mounting bracket with an 11mm hole.
The whole tailpipe / bracket assembly can be rotated in the silencer body to any position. Beautifully TiG welded construction. Internal perforated baffle, wrapped with long life, re-packable, Vetratex wadding and Unique dual size inlet pipes.
The four inlet pipes are made with a 75mm long welded-in inner sleeve with an internal diameter (I.D.) of 45mm. However, it is possible to grind off the seam weld on the end of the tubes and remove the inner sleeves. This will increase the inside diameter to 50.7mm.
5" Inch (127mm) Body diameter.
Overall length 1.42M (1420mm).
Weight 10.4 Kg
ATTENTION: These carry a £6 surcharge on shipping due to their size
COBRA SIDE PIPES #SIDEPIPES