Search
Filters
Close

180mm - 260mm

Part Number: BNSTYS
£12.00 incl VAT
excluding shipping

10" (260mm) open, 7" (180mm) closed. 3.5mm holes in both end brackets but can be drilled larger if necessary. Swivelling mounts at both ends.

Single hand operation - Lift to latch, lift again to release. Plated steel (may be clear od gold). Good quality, smooth action.

If your bonnet or boot panel is fairly stiff (e.g. Cobra boot) you may need only one stay but floppy or flexible panels (e.g. Cobra bonnet) may require one on each side.

BONNET & BOOT LID STAY SMALL #BNSTYS

10" (260mm) open, 7" (180mm) closed. 3.5mm holes in both end brackets but can be drilled larger if necessary. Swivelling mounts at both ends.

Single hand operation - Lift to latch, lift again to release. Plated steel (may be clear od gold). Good quality, smooth action.

If your bonnet or boot panel is fairly stiff (e.g. Cobra boot) you may need only one stay but floppy or flexible panels (e.g. Cobra bonnet) may require one on each side.

BONNET & BOOT LID STAY SMALL #BNSTYS

Write your own review
  • Bad
  • Excellent