Search
Filters
Close

Resistance 0-180 ohm range.
290mm from underside of flange to end of pole.
Flange dia 69mm with five mounting holes.
Part Number: FUSEND290
£60.00 incl VAT
excluding shipping

Stainless steel construction. No internal parts to go wrong.

A metal-impregnated, lightweight float rises up and down the sender tube as the fluid level changes.

A simple (white) adjustable clip allows you to set the bottom float position.

800mm heavy two core flex lead. 

Flange diameter 69mm.

Five, 5.4mm holes on  54mm PCD.

290mm measured from the underside of the flange to the end of the tube.

20mm projection above mounting surface.

3mm thick fuel-proof rubber gasket. 

5 Screws supplied 10-24 UNC

Resistance 0 - 180 ohm range.

NOTE: If your instrument does not match the resistance of this sender you may get inaccurate readings.

290mm FUEL TANK SENDER #FUSEND290

Stainless steel construction. No internal parts to go wrong.

A metal-impregnated, lightweight float rises up and down the sender tube as the fluid level changes.

A simple (white) adjustable clip allows you to set the bottom float position.

800mm heavy two core flex lead. 

Flange diameter 69mm.

Five, 5.4mm holes on  54mm PCD.

290mm measured from the underside of the flange to the end of the tube.

20mm projection above mounting surface.

3mm thick fuel-proof rubber gasket. 

5 Screws supplied 10-24 UNC

Resistance 0 - 180 ohm range.

NOTE: If your instrument does not match the resistance of this sender you may get inaccurate readings.

290mm FUEL TANK SENDER #FUSEND290

Write your own review
  • Bad
  • Excellent