Great value. Reliable solid state internals, no electrical contacts to burn out, no bearings to wear and no diaphragms to perish. 12 volt. Less than 2 amp current drain.
Will pump from 1.5 psi to 4.5 psi. Flow rate 100 ltrs/hour (21 gal/hr.) Will self prime up to 0.3mtrs lift.
Footprint 80mm x 80mm x 60mm high (without unions). 2 bolt fixing at 65mm centres.
Supplied with 2 x 8mm hosetail unions and one filter union. Union thread size 1/8" npt. Weight 469gm.
IMPORTANT NOTE: ALL FUEL PUMPS MUST BE FITTED WITH A PRE-FILTER ON THE INLET SIDE. RETURNED PUMPS WILL NOT BE REPLACED OR REFUNDED IF FOUND DAMAGED DUE TO DEBRIS.
ELECTRONIC FUEL PUMP #FPUMP2