RECESSED PLINTH Here's another option for mounting your 95mm rear lights.
Just cut a hole 88mm diameter in your panel and bond or screw-in the plinth.
The lamp is then fixed to the plinth with two small self-tappers. Height of plinth above surface is just 8mm.
Maximum diameter 99mm. Rear projection 16mm. ACCEPTS OUR #RLT7 to 12 and with a little
simple modification (remove the fixing projections on the inside), our #RL40, 41 and 42.
RECESSED PLINTH FOR 95mm LAMPS #PLINTH2