Needle roller bearings.
Both ends have the popular 14mm (9/16") x 36 female spline.
Overall length 93mm long x 41mm diameter.
Maximum working angle 30 degrees.
M8 high tensile pinch bolts included.
Weight 560 gms.
IMPORTANT SAFETY NOTE
THIS IS A VERY STRONG JOINT SO THE HIGH TENSILE PINCH BOLTS
MUST BE TIGHTENED TO SECURE THE JOINT SECURELY TO THE SPLINE.
USE A HIGH QUALITY H6 HEX ALLEN SOCKET ON A GOOD TORQUE WRENCH.
FAILURE TO TIGHTEN SUFFICIENTLY CAN RESULT IN THE UJ BEING LOOSE ON THE SPLINE.
SEE PICTURE
CHROME STEEL UNIVERSAL JOINT #UJCHR
