Remote Brake Servo

2:1 Ratio.

£192.00
excluding shipping
Part Number: REMSERV
Order within the next 0.00.00 for fast dispatch today.
Ship to
*
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
+ -

Free UK Delivery

Add servo assistance to your car - even if you have twin master cylinders with a balance bar (2 units will be required).

This unit can be mounted anywhere and plumbed between the cylinder outlet and the brakes.

Supplied with two mounting bracket options, a metre of servo hose and even a length of pre-formed steel brake pipe and unions.

3/8" UNF inlet & outlet and 10mm hose tail.

Main unit diameter - 190mm

Main unit thickness - 110mm 

Cylinder Length - 130mm
 
2 x 20mm 5/16" UNF mounting studs on 80mm Centres
 
Overall length including studs - 160mm 
 
Addition to diameter at vacuum hose 40mm. 
 
The unit can be mounted at any angle but please bear in mind that there is no bleed facility on the cylinder so it makes sense to keep the outlet higher than the inlet. 

REMOTE SERVO #REMSERV

Our Servos have small capillary components which, if blocked with debris or corroded by moisture in the fluid,

will render the servo inoperative. 

It is essential to flush through your brake system before installing these servos and use clean, new fluid.

Your warranty will be void if debris is found in returned servos.

UK Delivery Prices for online orders

Delivery Type Delivery Cost
Total Basket Incl VAT
  Estimated Delivery Time
  <£60 <£90 <£120 <£180 >£180  

Royal Mail 48 *
Basket up to £36 < 2kg

£1.99         2-3 working days from day of despatch
Royal Mail 48 Tracked * £3.98 Free Free Free  
Royal Mail 24 Tracked * £4.99 £2.99 Free Free   Order before 4.00pm Monday to Friday for next working day
DPD (UK Mainland Only) £6.98

£4.99

£2.99

£1.99

Free

DHL (UK Mainland Only) * £8.99

£6.98

£4.99

£2.99

Free

 
* Liquids and Aerosols can't be sent via Royal Mail or DHL.  Products over 90cm will also be excluded from Royal Mail.  Royal Mail 48 weight limit 2KG.

For international shipping & returns please visit our delivery page.

Existing reviews
Clutch Power assist
Michael 25/02/2019 14:27
Avatar
Bought this to lighten the load on my Marlin Roadster kit car clutch.
Delighted with the improvement it produced. Very easy to fit despite the limited space under my bonnet.
Although it did not really need it I did purchase a second hand
vacuum pump to boost the vacuum from my MBG engine which
now had to power both the brake and this new servo.
I understand that more modern engines produce less vacuum so such an addition might be needed.
Was this review helpful? Yes No (2/0)
Write your own review
*
*
  • Bad
  • Excellent

Add servo assistance to your car - even if you have twin master cylinders with a balance bar (2 units will be required).

This unit can be mounted anywhere and plumbed between the cylinder outlet and the brakes.

Supplied with two mounting bracket options, a metre of servo hose and even a length of pre-formed steel brake pipe and unions.

3/8" UNF inlet & outlet and 10mm hose tail.

Main unit diameter - 190mm

Main unit thickness - 110mm 

Cylinder Length - 130mm
 
2 x 20mm 5/16" UNF mounting studs on 80mm Centres
 
Overall length including studs - 160mm 
 
Addition to diameter at vacuum hose 40mm. 
 
The unit can be mounted at any angle but please bear in mind that there is no bleed facility on the cylinder so it makes sense to keep the outlet higher than the inlet. 

REMOTE SERVO #REMSERV

You may also be interested in the following product(s)
BBUM38

Sold Individually.

£1.20
EXSTRAP88

56mm between hole centres.
£3.60
VACHO10

SOLD BY THE METRE
10mm I.D. 17.2mm O.D.

£9.60
SWGUARDNI
SOLD SINGLY
£7.20
CDS2064

SOLD BY THE INCH

£0.90
BPCON

25ft roll.

£23.40
BBUMM10

Sold Individually.

£1.20
SSBU10M

SOLD SINGLY

£3.60
ENGMNT2

M10 Studs. 68mm dia x 34mm.
£7.20
RT1016

For use with 16mm² battery cable.
10mmring.
£0.60
BFHOSE

SOLD BY THE METRE

£12.60
PSBF04

Use our Stainless Braided PTFE hose #PTFEHO.

£6.00