Search
Filters
Close

Use for temp senders, fan switches. take-offs.

Part Number: INT32
£18.00 incl VAT
excluding shipping

Multi-purpose joiner. Just cut your top hose and insert the housing. Beautifully cnc’d aluminium. 1/8" NPT thread. Earth screw for sensor.

  • 68mm in length
  • Electronic water temp gauge sender using the standard 1/8" NPT thread. Your sender may also require an earth screw. We can re-tap the thread to match your sender for £5. 
  • Air bleed or coolant drain in top or bottom hose using an 1/8" NPT Blanking Plug or short bolt. 
  • Air bleed back to your header tank using a 1/8" NPT threaded hose-tail. 
  • We can re-tap the thread to accept the brass union supplied with our adjustable fan stat kit as shown in the illustration below. 
  • We can re-tap the thread to accept our fan switch. 

Other threads machined on request £5 extra please select 'tapping charge' option above and enter the required thread in the additional information box at the bottom of the page.

IN-LINE TEMP SENDER HOUSING/AIR BLEED/DRAIN 32mm #INT32

Multi-purpose joiner. Just cut your top hose and insert the housing. Beautifully cnc’d aluminium. 1/8" NPT thread. Earth screw for sensor.

  • 68mm in length
  • Electronic water temp gauge sender using the standard 1/8" NPT thread. Your sender may also require an earth screw. We can re-tap the thread to match your sender for £5. 
  • Air bleed or coolant drain in top or bottom hose using an 1/8" NPT Blanking Plug or short bolt. 
  • Air bleed back to your header tank using a 1/8" NPT threaded hose-tail. 
  • We can re-tap the thread to accept the brass union supplied with our adjustable fan stat kit as shown in the illustration below. 
  • We can re-tap the thread to accept our fan switch. 

Other threads machined on request £5 extra please select 'tapping charge' option above and enter the required thread in the additional information box at the bottom of the page.

IN-LINE TEMP SENDER HOUSING/AIR BLEED/DRAIN 32mm #INT32

Write your own review
  • Bad
  • Excellent