DYNAMATOR WITH TACHO DRIVE
Here's one for the Classic guys - a 12 volt, Negative earth/Positive Earth, 45 Amp Alternator
in a Lucas C39 and C40 Dynamo case.
It is a direct replacement and will fit the original dynamo mounts in many classic cars.
It has a built-in regulator and a 15mm diameter pulley shaft with a 3mm keyway (with key).
One 3/8" and one 1/4" male spade connectors.
This version has a cable tacho drive on the rear of the casing with an M19 x 1mm female thread
for attaching the cable outer casing.
Two, 8.5mm mounting holes and one M8 threaded hole for the adjuster mount.
Case diameter 106mm.
Weight 3.5 Kg.
NEGATIVE EARTH #DYNA2
POSITIVE EARTH #DYNA5
