Search
Filters
Close

Chrome Quarter Turn Fastener With Rivets For 7mm Top Panels

Chrome head diameter 12mm. Shaft diameter 6mm. Plate fixing hole centres 25mm.

Part Number: CQTRIV17
£3.00 incl VAT
excluding shipping

CHROME QUARTER TURN FASTENER WITH RIVETED BACKING PLATE.

The plate (receiver) is slid over the edge of the lower panel which can be up to 3mm thick,

secured with two rivets (supplied) and a clearance hole is drilled through the panel.

A 6mm hole is drilled through the top panel and the fastener is pushed through and twisted

just a quarter of a turn, locking it in place. A rubber washer prevents vibration and protects

the top panel's surface.

If your lower panel is very thin you can use a 'Doubler' - a small piece of panel glued to the first

to increase it's thickness.

Chrome head diameter 12mm.

Shaft diameter 6mm.

Plate fixing hole centres 25mm.

Hole centre distance from edge of lower panel 12mm. 

CHROME QUARTER TURN FASTENER WITH RIVETS FOR 7mm TOP PANELS #CQTRIV17 

CHROME QUARTER TURN FASTENER WITH RIVETED BACKING PLATE.

The plate (receiver) is slid over the edge of the lower panel which can be up to 3mm thick,

secured with two rivets (supplied) and a clearance hole is drilled through the panel.

A 6mm hole is drilled through the top panel and the fastener is pushed through and twisted

just a quarter of a turn, locking it in place. A rubber washer prevents vibration and protects

the top panel's surface.

If your lower panel is very thin you can use a 'Doubler' - a small piece of panel glued to the first

to increase it's thickness.

Chrome head diameter 12mm.

Shaft diameter 6mm.

Plate fixing hole centres 25mm.

Hole centre distance from edge of lower panel 12mm. 

CHROME QUARTER TURN FASTENER WITH RIVETS FOR 7mm TOP PANELS #CQTRIV17 

Write your own review
  • Bad
  • Excellent