Search
Filters
Close

295mm x 115mm 70 high.

Part Number: HOU2
£26.40 incl VAT
excluding shipping

These moulded ABS housings are designed to accept our 95mm diameter rear lamps. The housings can be trimmed to an angle for mounting the lamps vertically on a sloping rear panel. Material thickness approximately 2mm.

The cut edge can be trimmed with our #TRMU2 rubber ‘U’ channel and the whole assembly can be secured with long M4 fixings requiring drilling of only small holes in your bodywork.

295mm x 115mm 70 high.

(shown with a clear #RL20 and 60mm red reflector)

CARBON FIBRE EFFECT LAMP HOUSING TWIN #HOU2

These moulded ABS housings are designed to accept our 95mm diameter rear lamps. The housings can be trimmed to an angle for mounting the lamps vertically on a sloping rear panel. Material thickness approximately 2mm.

The cut edge can be trimmed with our #TRMU2 rubber ‘U’ channel and the whole assembly can be secured with long M4 fixings requiring drilling of only small holes in your bodywork.

295mm x 115mm 70 high.

(shown with a clear #RL20 and 60mm red reflector)

CARBON FIBRE EFFECT LAMP HOUSING TWIN #HOU2

Write your own review
  • Bad
  • Excellent