Search
Filters
Close

Resistance 0-180 ohm range.
600mm from underside of flange to end of pole.
Flange dia 69mm with five mounting holes.
Part Number: FUSEND600
£81.60 incl VAT
excluding shipping

Stainless steel construction. No internal parts to go wrong.

A metal-impregnated, lightweight float rises up and down the sender tube as the fluid level changes.

A simple (white) adjustable clip allows you to set the bottom float position.

800mm heavy two core flex lead. 

Flange diameter 69mm.

Five, 5.4mm holes on a 54mm PCD.

600mm measured from the underside of the flange to the end of the tube.

20mm projection above mounting surface.

3mm thick fuel-proof rubber gasket. 

5 Screws supplied 10-24 UNC

Resistance 0 - 180 ohm range

NOTE: If your instrument does not match the resistance of this sender you may get inaccurate readings.

600mm FUEL TANK SENDER #FUSEND600

Stainless steel construction. No internal parts to go wrong.

A metal-impregnated, lightweight float rises up and down the sender tube as the fluid level changes.

A simple (white) adjustable clip allows you to set the bottom float position.

800mm heavy two core flex lead. 

Flange diameter 69mm.

Five, 5.4mm holes on a 54mm PCD.

600mm measured from the underside of the flange to the end of the tube.

20mm projection above mounting surface.

3mm thick fuel-proof rubber gasket. 

5 Screws supplied 10-24 UNC

Resistance 0 - 180 ohm range

NOTE: If your instrument does not match the resistance of this sender you may get inaccurate readings.

600mm FUEL TANK SENDER #FUSEND600

Write your own review
  • Bad
  • Excellent